专注闭式冷却塔生产20年
厂家直销 咨询热线:0510-88525255
网站首页 企业简介 产品展示 新闻中心 工程案例 在线留言 联系我们
 
空冷器
冷却塔
余热回收
油冷却机
水冷机组
蒸汽冷凝利用
工程案例
地址:无锡市锡山区鹅湖镇荡口鹅湖村工业园区
电话:0510-88525255
传真:0510-88525235
E-mail:wxjylnkj@163.com
 
    您的位置-首页-新闻中心
 

混流式闭式冷却塔的工作原理

发布者:admin  发布时间:2016-12-07  点击:982
1、工作流体(水,油或其他液体)在盘管中流动,盘管外壁被喷淋水包裹,流体的热量通过管壁传递,与水和空气行程饱和湿热蒸汽,热量由风机排入大气,喷淋水在循环的过程中通过PVC散热片降低温度,闭式冷却塔与新鲜入风形成风水同向流动,盘管主要依靠湿热热传导方式,这样的运行原理的重要特点就是最大可能抑制盘管外壁的水垢生成。
2、卓越的热交换性能
运用风水同向混流式二次热交换的盘管与PVC填料组合的技术,实现了高效换热。由于空气和喷淋水同向流经盘管,喷淋水能最大程度覆盖在判官表面,保证盘管表面完全湿润。相比风水你想的结构,大大减少了盘管壁干点和水垢的形成。
方便清洗的倾斜式集水盘
集水盘底部向排污口端倾斜的结构设计,可方便清除集水盘的污水及沉淀杂质。
3、运输安装方便
采用上、下箱体标准组件运输,现场安装的方式,大大方便产品的运输及安装。
4、故障率低
风机和水泵均采用优质轴承,除此无其他运转磨损部件。风机采用直联式结构,无皮带轮结构带来的传动损失。噪音小,故障率低。
5、检修方便
采用人性化结构设计,超大检修门,内部空间宽敞,检修人员在产品内部能轻松的进行各种检修工作。
6、运行成本低、节能环保
由于本产品独特的结构形式,以及其特有的高热工性能,所以冷却效果好,运行节电,节水,低噪音不污染环境,是真正的节能环保产品。
7、实现不停机维修
本产品可在不停机的情况下对设备的零部件的进行检修。
8、占地面积少,综合投资低

1, the working fluid (water, oil or other liquid) flow in the coil, coil wall by spraying water parcels, heat transfer fluid through the tube wall, and water and air travel saturated hot steam, heat from the fan into the atmosphere, spray water through the PVC heat sink temperature decrease in the circulating process, the formation of Feng Shui flow in the same direction with the fresh wind into the coil, rely mainly on the damp heat conduction mode, the scale generation operation principle of this important feature is the maximum possible suppression coil wall.
2, excellent heat exchange performance
The high efficiency heat transfer is realized by using the combination of the two heat exchange coils and PVC filler in the same direction. Because the air and spray water to flow through the coil, spraying water to maximize coverage in judge surface coil surface to ensure completely wet. Compared to Feng Shui you want to structure, greatly reducing the formation of tube dry point and scale.
Convenient tilt type water collecting disc cleaning
Water collecting tray bottom to outfall end lean structure, convenient removal of sewage and impurity water collecting disc.
3, convenient transportation and installation
The use of upper and lower case standard components transport, on-site installation of the way, greatly facilitate the transportation and installation of products.
4, the failure rate is low
Fans and pumps are used in high quality bearings, in addition to no other running wear parts. The fan adopts the direct connection structure, without the belt wheel structure brings the transmission loss. Low noise, low failure rate.
5, convenient maintenance
The use of human structure design, super large access door, spacious interior space, maintenance personnel in the product can be easily carried out a variety of maintenance work.
6, low operating cost, energy saving and environmental protection
Due to the unique structure of the product, and its unique high thermal performance, so the cooling effect is good, the operation of power saving, water saving, low noise pollution environment, is the real energy saving and environmental protection products.
7, achieve non-stop maintenance
This product can not stop in the case of equipment parts for maintenance.
8, covers an area of less, low comprehensive investment
    
 
无锡聚源冷暖科技有限公司主营:闭式冷却塔产品 电话:0510-88525255
地址:无锡市锡山区鹅湖镇荡口鹅湖村工业园区 传 真:0510-88525235 E-mail:wxjylnkj@163.com 网址:www.wxjuyuan.com
Copyright © 2016 无锡聚源冷暖科技有限公司 版权所有 无锡网站优化:新互动网络